BTQZZ - 0113226-23 INITIATOR CARTRIDGE

Product Identification

Product ID:0113226-23 INITIATOR CARTRIDGE
MSDS Date:04/06/1994
FSC:1377
NIIN:01-166-4261
Kit Part:Y
MSDS Number: BTQZZ

Responsible Party
PACIFIC SCIENTIFIC CO.,HTL ENERGY SYSTEMS DIV.
7073 WILLIS RD
CHANDLER, AZ 85226-9724
US

Emergency Phone: 602-796-1100

Info Phone: 602-796-1100

Cage: 54181

Contractor
PACIFIC SCIENTIFIC CO.,HTL ENERGY SYSTEMS DIV.
5002 CHANDLER, AZ 85226 US

Telephone: 602-796-1100

Cage: 54181

Ingredients

PRIMERS(2), CONTAINING LEAD COMPOUNDS.

Fraction By Weight: <1%


AMMONIUM NITRATE (SARA III)

CAS: 6484-52-2

RTECS: BR9050000

Fraction By Weight: <1%


POTASSIUM NITRATE

CAS: 7757-79-1

RTECS: TT3700000

Fraction By Weight: <1%


BORON, AMORPHOUS POWDER.

CAS: 7440-42-8

RTECS: ED7350000

Fraction By Weight: <1%


POTASSIUM PERCHLORATE

CAS: 7778-74-7

RTECS: SC9700000

Fraction By Weight: <0.1%


NICKEL OXIDE

CAS: 1313-99-1

Fraction By Weight: <0.1%

Hazards

LD50 LC50 Mixture:IP LD50 (RAT) IS 630 MG/KG LEAD OXIDE
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS SEALED PREVENTING EXPOSURE
TO HAZARDOUS CHEMICALS INSIDE. IF SEAL RUPTURES EXPOSURE CAN
OCCURE: MAY CAUSE EYE, SKIN AND RESPIRATORY IRRITATION. SOME
INGREDIENTS ARE HIGHLY POISONOUS BY INGE STION.
Explanation of Carcinogenicity:NICKEL OXIDE IS LISTED BY IARC AND NTP
AS CARCINOGENIC.
Effects of Overexposure:IRRITATION OF EYES, SKIN AND THE RESPIRATORY
TRACT. ABDOMINAL SPASM, NAUSEA, VOMITING, HEADACHE, CONVULSION,
UNCONSCIOUSNESS. COUGHING AND BREATHING DIFFICULTY.
Medical Cond Aggravated by Exposure:EMPHYSEMA, ASTHMA MAY BE AGGRAVATED
BY OVEREXPOSURE TO IGNITION PRODUCTS.

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR, PROVIDE CPR/OXYGEN IF NEEDED.
EYE CONTACT:FLUSH WITH WATER FOR 15 MINUTES. GET MEDICAL HELP. SKIN
CONTACT:WASH WITH SOAP AND WATER. GET MED ATTENTION IF SYMPTOMS
PERSIS T. INGESTION:GET MEDICAL HELP IMMEDIATELY.

Fire Fighting

Extinguishing Media:WATER SPRAY
Fire Fighting Procedures:DO NOT ATTEMPT TO MANUALLY FIGHT FIRES.
PERSONNEL SHOULD EVACUATE AREA. PRODUCT MAY DEFLAGRATE OR DETONATE
IF EXPOSED TO HEAT OR SHOCK, RELEASING TOXIC FUMES.
Unusual Fire/Explosion Hazard:WARNING! EXPLOSIVE! PRODUCT MAY BE
SENSITIVE TO SHOCK, IMPACT, FRICTION, HIGH PRESSURE, HIGH
TEMPERATURE, ELECTROSTATIC DISCHARGE.MAY RELEASE TOXIC FUMES.

Accidental Release

Spill Release Procedures:IF PRODUCT SEAL RUPTURES, BARRICADE AREA, KEEP
COMBUSTIBLES AWAY FROM SPILLED MATERIAL. WITH RUBBER SHOVEL/BRUSH
CAREFULLY PLACE MATERIAL INTO CONDUCTIVE CONTAINER.PRODUCT CAN BE
DESENSITIZED WITH LAR GE AMOUNTS OF WATER OR MINERAL OIL.

Handling

Handling and Storage Precautions:STORE IN APPROVED STORAGE MAGAZINES
ONLY. KEEP PRODUCT DRY AND COOL. FOR SAFE HANDLING & STORAGE REFER
TO DOD SAFETY MANUAL # DOD4145.26M.
Other Precautions:STORAGE AND HANDLING MUST CONFORM TO
QUANTITY/DISTANCE REQUIREMENTS, BARRICADING, GROUNDING, AND
PERSONNEL MATERIAL LIMITS. ONLY TRAINED PERSONNEL MUST HANDLE
EXPLOSIVES.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR SUITABLE FOR
PARTICULATE/FUMES, OR SELF CONTAINED BREATHING APPARATUS FOR
PROTECTION AGAINST TOXIC GASEOUS IGNITION PRODUCTS.
Ventilation:MECH(GEN) VENTILLATION TO PREVENT DUST EXPLOSION. EXPLOSION
PROOF EQUIPMENT IS REQUIRED.
Protective Gloves:RUBBER, STATIC DISSIPATING GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDESHIELDS.
Other Protective Equipment:WEAR 100% COTTON UNDERWEAR AND
FLAME-RESISTANT, FULL-BODY OVERALLS AS WELL AS CONDUCTIVE SHOES.
Work Hygienic Practices:REMOVE & WASH CONTAMINATED CLOTHING PROMPTLY.
WASH THOROUGHLY AFTER HANDLING. AVOID BREATHING DUST.
Supplemental Safety and Health
EXPLOSIVE PRODUCT! ONLY TRAINED PERSONNEL MUST HANDLE IT. RCRA HAZ
WASTE CODE: D003 AND D008. DOT RQ: 1 LB (D008 LEAD).

Chemical Properties

HCC:E2
Decomp Temp:Decomp Text:410F,210C
Appearance and Odor:SOLID, METALLIC ORDNANCE HARDWARE, ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
PRODUCT IS SEALED PREVENTING EXPOSURE TO THE HAZARDOUS INGREDIENTS
INSIDE. IF SEAL RUPTURES, REMOVE ALL OTHER CHEMICALS.
Stability Condition to Avoid:SHOCK, IMPACT, FRICTION, ELECTROSTATIC
DISCHARGE, HIGH TEMPERATURE, HIGH PRESSURE, OPEN FLAMES, CHEMICAL
CONTAMINATION.
Hazardous Decomposition Products:EXTREME HEAT AND TOXIC GASES
CONTAINING LEAD, NICKEL AND BORON COMPOUNDS, OXIDES OF NITROGEN,
KCL DUST MAY BE EMITTED.

Disposal

Waste Disposal Methods:EXPLOSIVES OR RELATED DANGEROUS MATERIAL SHOULD
BE DESTROYED BY OPEN BURNING/OPEN DETONATION IN AN APPROVED
INCINERATOR, OR BY ANOTHER APPROVED METHOD SUCH AS CHEMICAL
TREATMENT/DESTRUCTION. CONTAMINA TED PROPERTY MUST NOT BE BURRIED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.